By clicking "Accept Cookies," you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. Read more about our use of cookies.
LLW10075LPSC
HINGES 100X75X2.5 LOOSE PIN SC PK=30 SATIN CHROME
Avg. Dispatch Time : 9 Day
Price is exclusive of Taxes
Lockwood Architectural Hinges
The Lockwood 100 Series Architectural Hinge Series are designed to provide an effective solution to hanging doors where there is a need for high grade architectural quality hinges. They are suitable for both interior and exterior applications.
The Lockwood Achitectural Loose Pin Hinges are suitable for regular internal doors, as they make it easier to remove the door from the frame for maintenance purposes. Additionally, they offer the convenience of quickly removing internal doors to accommodate the installation or removal of large furniture pieces or appliances.
These hinges are made from mild steel and have a typical metric pole pattern. Available in three colours, they can be coordinated with other products in the Lockwood Vivid® Collection.
Features
Dimensions
Height: 100mm
Width: 75mm
Thickness: 2.5mm
Materials
All visible surfaces high grade steel.
Fitting
When reading dimensions, the first figure always indicates the hinge height and the second indicates the width, eg. 100 mm x 75 mm. The door thickness and door jamb width (also trim size if applicable) determine the width of the hinge required. The width is measured across the leaves when the hinge is fully opened as shown within the catalogue.
Security fixed pin hinges should be used on exterior doors or doors opening out. Also, doors made of particle should have a capped tongue edge strip framing the door, so that hinges can be screwed into solid material.
For doors up to 2,100mm high, at least 3 hinges should be used if the Adjusted Door Weight is over 20kg. If the Adjusted Door Weight is 20kg or less, 2 hinges can be used. For doors over 2,100mm high, at least 4 hinges should be used. The method for establishing the Adjusted Door Weight is given within the catalogue.
Prior to selecting a suitable hinge, the Adjusted Door Weight needs to be calculated. The Adjusted Door Weight takes into account the extra stresses that door closers and wider doors place on the hinges and is used to select the appropriate hinge from the table below. Please refer to the catalogueno for calculation of the Adjusted Door Weight.
Finish
Satin Chrome SC
The Lockwood 100 Series Architectural Hinge Series are designed to provide an effective solution to hanging doors where there is a need for high grade architectural quality hinges. They are suitable for both interior and exterior applications.
The Lockwood Achitectural Loose Pin Hinges are suitable for regular internal doors, as they make it easier to remove the door from the frame for maintenance purposes. Additionally, they offer the convenience of quickly removing internal doors to accommodate the installation or removal of large furniture pieces or appliances.
These hinges are made from mild steel and have a typical metric pole pattern. Available in three colours, they can be coordinated with other products in the Lockwood Vivid® Collection.
Features
- Non-handed
- Butt hinge
- Loose pin
- Button tipped
- Standard metric hole pattern
- • Manufactured from high grade steel
- Maximum adjusted door weight 60kg
- Each Hinge comes with 8 x 10 Gauge x 30mm Wood Screws and 4x M5 x 12mm Metal Thread Screws
- Zinc Plated Mild Steel Screws
- Available in a standard box quantity of 30
- Supplied in trade pack
Dimensions
Height: 100mm
Width: 75mm
Thickness: 2.5mm
Materials
All visible surfaces high grade steel.
Fitting
When reading dimensions, the first figure always indicates the hinge height and the second indicates the width, eg. 100 mm x 75 mm. The door thickness and door jamb width (also trim size if applicable) determine the width of the hinge required. The width is measured across the leaves when the hinge is fully opened as shown within the catalogue.
Security fixed pin hinges should be used on exterior doors or doors opening out. Also, doors made of particle should have a capped tongue edge strip framing the door, so that hinges can be screwed into solid material.
For doors up to 2,100mm high, at least 3 hinges should be used if the Adjusted Door Weight is over 20kg. If the Adjusted Door Weight is 20kg or less, 2 hinges can be used. For doors over 2,100mm high, at least 4 hinges should be used. The method for establishing the Adjusted Door Weight is given within the catalogue.
Prior to selecting a suitable hinge, the Adjusted Door Weight needs to be calculated. The Adjusted Door Weight takes into account the extra stresses that door closers and wider doors place on the hinges and is used to select the appropriate hinge from the table below. Please refer to the catalogueno for calculation of the Adjusted Door Weight.
Finish
Satin Chrome SC
| Model No | LLW10075LPSC |
|---|---|
| EAN | 9311847800151 |
