DX MECHANICAL DIGITAL LOCKSET - SYNERGY 60MM CODE 0VERRIDE NO CYL/FURN LH SATIN CHROME

Lockwood Digital DX Mortice Lockset with Key Override

The Lockwood Digital DX Locksets provide a mechanical method of keyless entry and are designed to control access into commercial areas, especially when frequent combination changes are needed to maintain security. For extra security when under forced attack, the inbuilt clutching mechanism allows the outside knob to rotate without operating or damaging the lock. Lockwood Digital DX Locksets are designed to control access into commercial areas, especially when frequent combination changes are needed to maintain security. The factory set 4 digit code is easily changed to any 4, 5 or 6 digit code using the code changing kit provided with each lock. As the digital lockset utilizes mechanical operation, electrical wiring is not required.

The Lockwood Synergy® 3570 series Cylinder Mortice locks offer a wide range of security cylinder mortice locks and latches suitable for heavy duty use in industrial and commercial buildings, institutions, clubs, schools, hospitals, hotels and similar buildings. The Lockwood Synergy® 3570 series Cylinder Mortice locks are made from quality materials to meet high durability and strength requirements.

Features

• 3572 Synergy series mortice deadlatch
• Backset 60mm, extended backsets 89mm and 127mm on application
• Latch 18mm projection
• Order Cylinder separately. Lockwood Oval cylinder overirdes code (not included)
• Door thickness range 35mm to 50mm
• Internal case manufactured from high purity zinc alloy
• Latch manufactured from stainless steel
• Order furniture separately. For furniture to suit Lockwood Synergy 3570 series select from Lockwood 1800 and 2800 Series
• Successfully tested to 4 hours on fire door assemblies in accordance with Australian Standard AS 1905.1 2005 - Part 1, Fire Resistant Doorsets
• Left handed operation
• Plated finish
• Supplied in trade pack

Dimensions*
Hieght: 164mm
Width: 45mm
Depth: 27mm
Projection: 29mm

*Excludes Gasket

Keying
Lockwood locks can be keyed to a number of controlled and/or specially keyed systems. These range from legally protected keys to protect against unauthorised duplication, which can also include specially designed key systems such as master key systems, which allow for different levels of mechanical access control.

Bolt Hold-back Function
A key operated hold-back function is available. This is achieved by a pin tumbler cylinder on the inside allowing the bolt to be held back and will also require change to internal furniture plate.

OperationOutside Function
Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turn knob the code is automatically cancelled. The key override pin tumbler cylinder enables quick access by key for authorities such as the fire brigade or those who need to carry a master key to access all rooms of a building.
Inside Function
Opened by knob/lever at all times.
Hold‑Back Function
Bolt hold-back function activated by rotating inside knob/lever clockwise, past 90 degrees.

Finish
Satin Chrome Brushed
Note: Finish denotes the finish on the digital code pad, the inside furniture and faceplate is supplied in satin chrome.