SELECTOR MKII PRIMARY ESCAPE 127MM MORTISE LOCK - NO HUB DISC STAINLESS STEEL

Lockwood Selector® Mortice Lock

In the spirit of continuous improvement, the Lockwood Selector® 3770 Series MkII Mortice lock range is the latest step in the evolution of the Lockwood Selector® mortice lock. This upgrade allows for more applications of the Lockwood Selector® mortice lock such as use with the Lockwood Fluid Panic Exit Device. And while the both the Lockwood Selector® Series mortice locks (MkI) and the new MkII perform particularly well against the Australian Standard, the Lockwood Selector® 3770 Series MkII Mortice lock range is a further improvement over the earlier models when it comes to the list of nonstandard tests which ASSA ABLOY performs on these locks. The non-standard list of tests reflect real world treatment of mortice locks over and above that contained in the Australian Standard and are based on the extensive experience ASSA ABLOY Opening Solutions has with mortice locks. ASSA ABLOY Opening Solutions conducts tests beyond the Australia Standard up to the point of destruction to identify failure modes, to prevent access under these conditions.

The embossed dot on the underside of the auxiliary bolt of the Lockwood Selector® 3770 Series MkII Mortice for the 60mm version. This will identify the installed Lockwood Selector® mortice lock as a Lockwood Selector® 3770 Series MkII Mortice lock. The main bolt hole shape in the faceplate has also changed for Lockwood Selector® 3770 Series MkII Mortice. This can be seen when the cover plate is removed and is used to identify the installed Lockwood Selector® 3770 Series MkII Mortice lock for the 89mm and 127mm backset versions. The Latching Adaptor for Selector 3770 Series MkII is not backwards compatible. Therefore, 3770M1-ADAPTOR MUST be used for Selector Mortice Lock MkI and 3770M2-ADAPTOR MUST be used for Selector Mortice Lock MkII.

These locks have various latching functions which can be operated by key or handle outside and by turnknob, key or handle inside.

Features

• Escape function
• Easy red/green function setting
• All lock settings are made from under the faceplate allowing for simple in-door configuration
• Standard primary locks include anti-lockout and holdback capabilities
• Improved cylinder functions including lock/unlock and retract latch as standard
• Through-fixing of rose furniture turn knobs and escutcheons
• Reduced range of cylinder cams and turn adaptors relative to other commonly available commercial cylinder mortice locks
• Deadlatching only
• No hub disc - will accept 7.6mm single solid spindle
• Accepts oval 570 cylinders
• 60mm backset
• 15mm Latchbolt
• Non-handed
• Cylinder Retaining Pin Hard-drawn spring steel wire, corrosion protected
• Suits 32mm to 50mm door thickness - components to facilitate use on thicker doors are available on application
• Supplied in trade pack
• Australian designed

Case Dimensions
Height: 117mm
Width: 19mm
Depth: 155mm

Faceplate Dimensions
Hieght: 175mm
Width: 25mm
Depth: 2mm

Application
A comprehensive range of cylinder mortice locks suitable for heavy duty use in industrial and commercial buildings, institutions, clubs, schools, hospitals, hotels and similar buildings. Ideally suited for offices, storerooms, stairways, emergency egress doors and classroom doors.

Case and Faceplates

• High purity zinc alloy material cases with stainless steel chassis plates. Stainless steel faceplates provided as standard
• Brass faceplates available for alternative finishes

Latch Bolts

• Latch bolts are made with stainless steel
• Deadlatching where applicable is achieved by an auxiliary stainless steel latch bolt
• Reversible for both left and right hand doors, opening in or opening out whilst lock is in door
• Electric Strike compatibility
• Separate auxiliary bolt moves into lock case simultaneously with latch bolt
• Radius bolt provides greater deadlatch throw and smoother closing action

Door Clearance
To ensure correct functioning of the deadlatching mechanism and security for all locks, the clearance between the door and the frame should be 3mm. The deadlatching will operate up to 8mm door clearance, however door clearances over 5mm are not recommended.

Security
All Lockwood Selector® 3770 Series Cylinder Mortice Locks conform with Level S7 (Physical Security) Australian Lock Standard (AS-4145.2-2008). Conforms to Level S8 (Physical Security) when fitted with door furniture and anti-drill cylinder.

Durability
All Lockwood Selector® 3770 Series Cylinder Mortice Locks conform with Level D8 (Durability) Australian Lock Standard (AS4145.2-2008).

Fire Rating
All Lockwood Selector® 3770 Series Cylinder Mortice Locks have been successfully tested up to 4 hours (depending on type of doorsets) on fire door assemblies in accordance with Australian Standard AS 1905.1-2015, Part 1: Fire Resistant Doorsets.

Anti-Corrosion
All Lockwood Selector® 3770 Series Cylinder Mortice Locks conform with Level C6 (168 hours) Australian Standard (AS4145.2-2008).

Cylinder
Accepts standard Lockwood oval shaped brass cylinders and brass barrels. Lockwood cylinders include bump resistant five pin tumbler mechanism.
Functions require the use of different cams and adaptors.

Keying
Lockwood locks can be keyed to a number of controlled and/or specially keyed systems. These range from legally protected keys to protect against unauthorised duplication and can also include specially designed keying systems such as master key systems. This allows for different levels of mechanical access control - please note these are not included and are sold separately

Extended Cylinders
Modular Cylinder Extensions are available for thicker doors - please note these are not included and are sold separately

Aluminium Doors
Specify Selector® 3772-AFKIT for aluminium door fixing kit to convert a timber fix lock to aluminium fixing. The aluminium door fixing kit comes with a 156mm by 25mm radius faceplate common to other aluminium door locks
Please note these are sold separately

Rebate
Rebate kits to suit 13mm standard rebate are available - please note these are not included and are sold separately

Electric Strikes
Lockwood offers a wide range of electric strikes which are compatible with the Lockwood Selector® 3770 series mortice lock - please note these are not included and are sold separately

Finish
Stainless Steel